The DOW Membrane recently estimated the various solutes rejection ratio in their own production of membrane of FT30 Model
I think, probably most of the membrane’s rejection ratio has to be similar one and note that, solutes Molecular weight also they given, further they indicated clearly this is quick screen, particularly with changes in feed water concentration, pH and temperature factors are involve.
| Solute | MW | Rejection, % |
| 1, 1, 1-Trichloroethane | 133 | 98 |
| 1, 2-Dibromoethane | 173 | 15 |
| 1, 2-Dichloroethane | 99 | 37 |
| 1, 2, 3-Trichlorobenzene | 181 | >57 |
| 1, 2, 4-Trichlorobenzene | 181 | 96 |
| 1, 2, 4-Trimethylbenzene | 120 | 57 |
| 1, 2-Dichlorobenzene | 147 | 70-92 |
| 1, 3-Dichlorobenzene | 147 | 66-69 |
| 1, 4-Dichlorobenzene | 147 | 61 |
| 1-Chlorododecane | 204 | 87 |
| 1-Methylnaphthalene | 142 | 67 |
| 2, 2’, 5, 5’-Tetrachlorobiphenyl | 290 | 46 |
| 2, 4, 6-Trichlorophenol | 197 | 100 |
| 2, 4-Dichlorophenol | 163 | 93 |
| 2, 6-Dimethylphenol | 122 | 92 |
| 2, 6-Di-Tert-Butyl-4-Methylphenol | 220 | 96 |
| 3, 8-Dimethylphenol | 122 | 92 |
| 3-Hydroxy-Capric Acid | 188 | >98 |
| 3-Pentanone | 86 | 74 |
| 4-Ethylphenol | 122 | 84 |
| 4-Isopropylphenol | 136 | 84 |
| 5-Chlorouracil | 146 | 88 |
| Acetic Acid | 60 | 45 |
| Acetone | 58 | 70 |
| Aluminum Nitrate | 213 | 86 |
| Aluminum Sulfate | 342 | 89 |
| Aniline | 93 | 64-75 |
| Anthraquinone | 208 | 93 |
| Benzene | 78 | 19 |
| Benzoic Acid | 122 | 92 |
| Benzothiazole | 133 | 79 |
| Biphenyl | 154 | 91 |
| Bis (2-Ethylhexyl) Phthalate | 390 | 94 |
| Bromodichloromethane | 163 | 79 |
| Bromoform | 253 | >67 |
| Cadmium Sulfate | 208 | 97 |
| Caffeine | 174 | 99 |
| Calcium chloride | 111 | 99 |
| Calcium Nitrate | 164 | 95 |
| Carbon Tetrachloride | 153 | 98 |
| Cesium Chloride | 168 | 97 |
| Chlorobenzene | 112 | 0-50 |
| Chloroform | 119 | 71-90 |
| cis-1, 2-Dichloroethylene | 97 | 20 |
| Clofibric Acid | 214 | >99 |
| Copper Sulfate | 160 | 99 |
| Cyclohexanone | 98 | 95 |
| Dibromochloromethane | 208 | 79 |
| e-Caprolactum | 113 | 85 |
| Ethanol | 46 | 38-70 |
| Ethyl Benzene | 106 | 71 |
| Formaldehyde | 30 | 35 |
| Furfural | 96 | 35 |
| Glucose | 180 | 98-99 |
| Glycine | 188 | 78 |
| Heptaldehyde | 114 | 100 |
| Humic Acid | 98 | |
| Hydrochloric Acid | 36 | 28 |
| Isophorone | 138 | 96 |
| Isopropanol | 60 | 90 |
| Lactic Acid (pH 2) | 90 | 94 |
| Lactic Acid (pH 5) | 90 | 99 |
| Magnesium Chloride | 120 | 98 |
| Magnesium Sulfate | 120 | 99 |
| Manganese (II) Sulfate | 151 | 97 |
| Methanol | 32 | 25 |
| Methyl Ethyl Ketone | 72 | 73 |
| Methyl Isobutyl Ketone | 100 | 98 |
| Naphthalene | 128 | 80 |
| Nickel Chloride | 130 | 96-99 |
| Nickel Sulfate | 155 | 97-99 |
| o-Cresol | 108 | 84 |
| o-Xylene | 106 | 67 |
| p & m Xylene | 106 | 38 |
| Pentachlorophenol | 266 | >86 |
| Phenol-80% | 94 | 65 |
| Phosphoric Acid | 96 | 94 |
| Quinoline | 129 | 97 |
| Silica | 60 | 98 |
| Sodium Acetate (1%) | 82 | 88 |
| Sodium Bicarbonate | 84 | 98 |
| Sodium Bromide | 103 | 96 |
| Sodium Chloride | 58 | 99 |
| Sodium Cyanide (ph 11) | 49 | 95 |
| Sodium Di-H Phosphate | 120 | 98 |
| Sodium Fluoride | 42 | 98 |
| Sodium Hydrogen Sulfate | 120 | 76 |
| Sodium Iodide | 150 | 97 |
| Sodium Mono-H Phosphate | 142 | 98 |
| odium Nitrate | 85 | 93-98 |
| Sodium Orthophosphate | 164 | 99 |
| Stearic Acid | 204 | 71 |
| Strontium Chloride | 158 | 96 |
| Succinic Acid | 118 | 35 |
| Sucrobe | 342 | 99 |
| Sulfuric Acid | 98 | 84 |
| Tetrachloroethylene | 165 | 68-80 |
| Tin (II) Sulfate | 215 | 85 |
| Tributyl Phosphate | 266 | 49 |
| Trichloroethylene | 131 | 30-43 |
| Trimesic Acid | 210 | 96 |
| Urea | 60 | 70 |
| Zinc Chloride | 136 | 93 |
| Zinc Sulfate | 161 | 98 |
This table is useful depends on what type of solute handle in your plant.
Molecular weight | Rejection Ratio of Various Solutes passing through Membrane
Leave a Reply