If you have Biological tank of your Water Treatment stream, Install Online Dissolved Meter to the tank and Connect suitable Frequency Driver / Inverter for your Air Blower System.
Definitely, which will help to monitor and control the Excess Oxygen Develops. Similarly it will adjust automatically when oxygen will sort fall below the set limit into the Biological Tank,
On [....]
Are you going to construct new ETP for your existing industry or new industry, ensure this checklist, the following factors must be adhered while design the Efflent Treatment Plant
The Most Important Factors of ETP Design | Selection are
1. What national or international standards must you comply with?
2. What is your waste? What volume of effluent do you [....]
How much % of recovery is possible in textile Reverse Osmosis Plant?, Any environmental engineer try to get maximum Recovery from the RO plant, generally it is not easy in textile plant, As of my knowledge the following parameter / factors gives more threaten to us,
Usually, In First Stage of RO plant 65-70 %; second stage 50-55%; Third Stage [....]
Are you hearing Glass Fused to Steel (GFS) tank? Yes, many countries they are using for their application either it is Clear Water, Municipal or Effluent water storage application,
GFS is two material are fused together to improve its strength and flexibility of steel combined with the corrosion resistance of glass,which is applied both inner and outer surfaces further it [....]
Select correct oxygen transfer rate equipments for the aeration tank’s air requirement, so you can be saved air compressor energy effectively
|
Equipments/Devices |
Typical ratings,Ib O2 /hp-hr |
| Submerged aerators | 4.0 |
| Porous diffusers | 1.5 |
| Surface aerators | |
| Plate | 2.0-2.5 |
| Turbine | 3.0-3.5 |
| Propeller | 2.5-3.5 |
| Combination aerators 2-3 | 2-3 |
Except in cases of degasification, aeration requirement is a function of degree of oxygen deficiency [....]
Advantages of Electrocoagulation process for color removal in water treatment plant, they are using Electro Chemical (Electrocoagulation) process to remove the Color, COD, BOD and electrical conductivity by 80-90% in COD/BOD aspect and 20-35 % in Electrical Conductivity side.
Physico-chemical treatment, Coagulation and flocculation are traditional methods for the treatment of polluted water. In these processes, coagulating agents such as [....]